N/A http://www.eliteconcretepolishing.com/ Tue, 21 May 2013 12:38:11 -0500 en Call Us: @ 920-726-4245 Ask us a question about these vacuums. Levetec's Industrial Vacuum's Nilfisk S-Series Industrial Vacuum's We stock high quality Nilfisk Vacuum's for use with any grinders and Polishers! Nilfisk S-3 Single-Phase Vacuum Available in a variety of configurations, the NEW S3 single-phase industrial vacuum cleaner features solid construction and cutting-edge innovations like an electronic keypad with LED indicators to monitor the performance of the main and HEPA filters. The S3-50N2A is available with 50 liter collection capacity, accessories, and can be equipped with many different features including, liquid or level sensors for automatic shut-off and the Longopac collection system, a continuous bag that can be filled, cut, disposed, and immediately restored for a new use. http://www.eliteconcretepolishing.com/content-product_info/product_id-1871/nilfisk_s3_50n2a.html http://www.eliteconcretepolishing.com/images/products/S3.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1871/nilfisk_s3_50n2a.html Nilfisk S3-100N2A Industrial Vacuum Available in a variety of configurations, the NEW S3 single-phase 220V industrial vacuum cleaner features solid construction and cutting-edge innovations like an electronic keypad with LED indicators to monitor the performance of the main and HEPA filters. The S3-100N2A is available with 100 liter collection capacity, accessories, and can be equipped with many different features including, liquid or level sensors for automatic shut-off and the Longopac collection system, a continuous bag that can be filled, cut, disposed, and immediately restored for a new use. http://www.eliteconcretepolishing.com/content-product_info/product_id-1873/nilfisk_s3_100n2a.html Nilfisk S-2 Industrial Vacuum The new S2 single-phase industrial vacuum cleaner from Nilfisk CFM has been designed to meet a wide range of industrial cleaning challenges. Available in a variety of configurations, this industrial vacuum features strong solid construction and cutting-edge innovations like an electronic keypad with LED indicators that monitor the performance of the main and HEPA filters. Standard features of the S2 include a manual filter shaker to quickly clean the main filter, an oversized handle for easy push/pull transport, accessory storage tray, accessories, cable holder and more. The S2 is available with the Longopac collection system, a continuous bag that can be filled, cut, disposed, and immediately restored for a new use. http://www.eliteconcretepolishing.com/content-product_info/product_id-1863/nilfisk_s2.html http://www.eliteconcretepolishing.com/images/products/S2.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1863/nilfisk_s2.html Call Us: @ 1-920-726-4245 Levetec's Industrial Vacuum's Nilfisk S3-100N1A Single-Phase Vacuum Available in a variety of configurations, the NEW S3-100N1A single-phase industrial vacuum cleaner features solid construction and cutting-edge innovations like an electronic keypad with LED indicators to monitor the performance of the main and HEPA filters. The S3-100N1A is available with 100 liter collection capacity, accessories, and can be equipped with many different features including, liquid or level sensors for automatic shut-off and the Longopac collection system, a continuous bag that can be filled, cut, disposed, and immediately restored for a new use. http://www.eliteconcretepolishing.com/content-product_info/product_id-1864/nilfisk_s3_100n1a.html http://www.eliteconcretepolishing.com/images/products/S3.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1864/nilfisk_s3_100n1a.html Call Us: @ 920-726-4245 Levetec's Barracuda Milling Tools The Barracuda milling tools are a unique tool designed for quick removal of any coatings, such as epoxy and glue from concrete floors. It is also well suited to efficiently flatten bumpy concrete surfaces! The tool is made with solid PCD inserts that are a PolyCrystalline Diamond, ideally suited to remove material without grinding through it which reduces heat so that epoxy or glue coating does not get hot and stick to the tooling. It is a very medium and will last up to 100,000 sq Ft. Barracuda Max Barracuda Max is well suited to Floor Machines that are over 500 Lbs, and where less scratching is desired. Designed to quickly remove adhesive glues and hard epoxy coatings, as well as flaking or bumpy concrete surfaces. http://www.eliteconcretepolishing.com/content-product_info/product_id-1867/barracuda_max.html http://www.eliteconcretepolishing.com/images/products/Barracuda-Max.gif http://www.eliteconcretepolishing.com/content-product_info/product_id-1867/barracuda_max.html Levetec's Barracuda Milling Tools The Barracuda milling tools are a unique tool designed for quick removal of any coatings, such as epoxy and glue from concrete floors. It is also well suited to efficiently flatten bumpy concrete surfaces! The tool is made with solid PCD inserts that are a PolyCrystalline Diamond, ideally suited to remove material without grinding through it which reduces heat so that epoxy or glue coating does not get hot and stick to the tooling. It is a very medium and will last up to 100,000 sq Ft.Barracuda Light The Barracuda Light is made for very hard coatings and removal of surface concrete. It can also be used for glue or coatings removal, or on lighter floor machines that are under 400 Lbs. http://www.eliteconcretepolishing.com/content-product_info/product_id-1866/baracuda_light.html http://www.eliteconcretepolishing.com/images/products/cudaLightWEB.gif http://www.eliteconcretepolishing.com/content-product_info/product_id-1866/baracuda_light.html The perfect stair grinder and polisher MINIELLE is the ideal solution for grinding and polishing stairs, bathrooms, edges, corners and any narrow area. You work standing up and you can use either a 4" or 6" grinding head for getting close in the corners. http://www.eliteconcretepolishing.com/content-product_info/product_id-1862/stand_up_edge_grinder.html http://www.eliteconcretepolishing.com/images/products/Standup Edge Grinders.gif http://www.eliteconcretepolishing.com/content-product_info/product_id-1862/stand_up_edge_grinder.html The Avenger 750 is a very powerful machine with a lot of torque to the floor for the heavy grinds and for removing epoxy coatings and glue, a highly productive machine but easy to handle and operate. This is the ideal machine for larger jobs above 10,000 Sq Ft. The machine comes with a the raise and lower feature and all the mounting hardware, all you need is diamond tools International Voltages available. or 220 Single phase can be ordered. Just click on the Catalog above for more info and spec's http://www.eliteconcretepolishing.com/content-product_info/product_id-1859/avenger_750.html http://www.eliteconcretepolishing.com/images/products/Avenger-750-15HP.png http://www.eliteconcretepolishing.com/content-product_info/product_id-1859/avenger_750.html The Avenger 550 is the perfect mid size machine with huge capacity. The Avenger is a Three Phase machine for better reliablity, but you can order it with Single Phase 220 volt power input, so you can use it at a home or small business location. Just plug it into a stove or dryer receptical, or if you want any other 3 phase voltage. International Voltages available. http://www.eliteconcretepolishing.com/content-product_info/product_id-1858/avenger_550.html http://www.eliteconcretepolishing.com/images/products/Avenger-550-7.5HP.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1858/avenger_550.html The Avenger 460 has all the features of much larger machines, such as forward and reverse directions on the grinding heads. This allows you to run directional tools such as scrapper tools to remove epoxy and glue. Most diamond tools do not have a direction so you can run those either way. The 460 also has variable speed to grind rough floors by slowing down the grinding heads to keep them from bouncing which will stop them from cutting. By speeding up the grinding heads you can polish and burnish the floor with the proper tooling. Variable speed also allows you to work on marble and granite floors. http://www.eliteconcretepolishing.com/content-product_info/product_id-1857/avenger_460.html http://www.eliteconcretepolishing.com/images/products/Avenger-460-5HP.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1857/avenger_460.html The Avenger 460 is a great machine for smaller jobs or homes, offices and rooms. Available in 110 volt or 220 volt single phase The size and weight allow for easy loading and unloading at the jobsite or to carry up to a mezzanine or landing. The Avenger 460 is very versatile, and can be used for coatings removal, grinding and polishing. The machine is a full three phase machine internally with variable speed and forward and reverse, this also means that this machine is vastly more reliable then the regular single phase machines for competitive sources. Click on the Catalog above for more info and Spec's http://www.eliteconcretepolishing.com/content-product_info/product_id-1856/avenger_460.html http://www.eliteconcretepolishing.com/images/products/Avenger-460-5HP.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1856/avenger_460.html Resin Diamond tools can vary greatly in their performance and production rates on soft to hard Concrete or terrazzo and natural stone. Picking the right tool for the job is all the more important. This allows the tool to last and maximize the shine. http://www.eliteconcretepolishing.com/content-product_info/product_id-1870/resin_diamond_tools.html http://www.eliteconcretepolishing.com/images/products/Diacreteresin[1].jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1870/resin_diamond_tools.html * You get what you pay for. * Compare and see that Levetec's Diacrete grinding pads are bigger then most of our competetors products and they work! With a diameter of one inch and a 12mm or 1/2 inch tall, you truely do get what you pay for with a diamond tool that will last 25000- 30000 Sq Ft and stay open. Made by a company that specializes in metal alloys, they got it right with the DiaCrete grinding tools. We keep getting calls about these pads that our customers costs go down and they get done fast. Its all about production, get it done fast without scratches and problems. Available in Soft, Medium and Hard Bond. Item # Description http://www.eliteconcretepolishing.com/content-product_info/product_id-1872/la_double_round_metal_bonds.html http://www.eliteconcretepolishing.com/images/products/ZLmetals.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1872/la_double_round_metal_bonds.html The Combo Coatings tool works by riding on the diamond segment which limits travel of the tool into the concrete surface. This allows the two 1/4 heads to scrap away coatings or Glue, but not damage the concrete itself. The trailing segment itself will also cut through thin mil coatings that the PCD scrappers miss, helping remove coatings. This tool is very aggressive and will work on lighter machines. only $39.00 each http://www.eliteconcretepolishing.com/content-product_info/product_id-1869/combo_coatings_tool.html http://www.eliteconcretepolishing.com/images/products/Combo Coatings Removal Tool.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1869/combo_coatings_tool.html * You get what you pay for. * Compare and see that Levetec's Diacrete grinding pads are bigger then most of our competetors products and they work! With a diameter of one inch and a 12mm or 1/2 inch tall, you truely do get what you pay for with a diamond tool that will last 25000- 30000 Sq Ft and stay open. Made by a company that specializes in metal alloys, they got it right with the DiaCrete grinding tools. We keep getting calls about these pads that our customers costs go down and they get done fast. Its all about production, get it done fast without scratches and problems. Available in Soft, Medium and Hard Bond http://www.eliteconcretepolishing.com/content-product_info/product_id-1865/diacrete_floor_grinding_tools.html http://www.eliteconcretepolishing.com/images/products/ZLmetals.jpg http://www.eliteconcretepolishing.com/content-product_info/product_id-1865/diacrete_floor_grinding_tools.html http://www.eliteconcretepolishing.com/content-product_info/product_id-1874/test.html